APC SRTG6KXLI Uninterruptible Power Supply SRTG6KXLI

Automatic restart of loads after UPS shutdown

Automatically starts up the connected equipment upon the return of utility power.

Automatic self-test

Periodic battery self-test ensures early detection of a battery that needs to be replaced.

Battery failure notification

Provides early-warning fault analysis on batteries enabling timely preventive maintenance

ECO Mode

Operating mode that by-passes unused electrical components in good power conditions to achieve high operating efficiency without sacrificing protection

LCD Status Display

Provides key UPS status at a glance. Multiple status indicators with load and battery bar graphs.

Cold-start capable

Provides temporary battery power when the utility power is out.

Safety-agency approved

Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

Resettable circuit breaker

Easy recovery from overloads; no need to replace a fuse. (Not available on Wall Tap SKUs)

Power conditioning

Protects connected loads from surges, spikes, lightning, and other power disturbances.

Input Power Factor Correction

Minimizes installation costs by enabling the use of smaller generators and cabling.

Generator compatible

Ensures clean, uninterrupted power to protected equipment when generator power is used.

Frequency and voltage regulation

Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.

SmartSlot

Customize UPS capabilities with management cards.

Network manageable

Most models provide remote power management options of the UPS over the network. Many do not have NMC embedded.

Serial connectivity

Provides management of the UPS via a serial port.

InfraStruXure Manager Compatible

Enables centralized management via the APC InfraStruXure Manager.

LED status indicators

Quickly understand unit and power status with visual indicators.

Battery



Automatic battery test



Yes


Battery life (max)



5 year(s)


Battery recharge time



4 Hour


Battery technology



Sealed Lead Acid (VRLA)


Battery voltage



96 V


Cold start



Yes


Hot-swap battery



Yes


Design



Certification



CE, EN/IEC 62040-1


Display type



LCD


Form factor



Compact


International Protection (IP) code



IP20


LED indicators



Y, Yes


Product colour



Black


Features



Audible alarm modes



Alarm when on battery, Low battery alarm, Overload alarm


Audible alarm(s)



Yes


Crest factor



3:1


ECO mode



Yes


Emergency Power Off (EPO)



Yes


Input frequency



40/70 Hz


Input operation voltage (max)



285 V


Input operation voltage (min)



100 V


Noise level



55 dB


Output frequency



50/60 Hz


Output operation voltage (max)



240 V


Output operation voltage (min)



220 V


Output power



6000 Watt


Output power capacity



6 kVA


Output voltage Total Harmonic Distortion (THD)



2 %


Surge energy rating



600 J


UPS topology



Double-conversion (Online)


Waveform



Sine


Operational conditions



Non-operating altitude



0 - 15240 m


Operating altitude



0 - 2011 m


Operating relative humidity (H-H)



0 - 95 %


Operating temperature (T-T)



0 - 40 �C


Storage relative humidity (H-H)



0 - 95 %


Storage temperature (T-T)



-15 - 45 �C


Package dimensions



Depth (package,cm)



79 cm


Gross Weight (Package, kg)



5.2 kg


Height (package,cm)



27.5 cm


Width (package,cm)



59 cm


Ports & interfaces



AC outlet types



C13 coupler, C19 coupler


AC outlets quantity



3 AC outlet(s)


Emergency Power Off (EPO) connector



Yes


Ethernet LAN (RJ-45) ports



1


Serial interface



Yes


SmartSlot



Yes


USB port



Yes


Product dimensions



Net Weight (Product, kg)



4 kg


Product Depth



62 cm


Product Height



17.8 cm


Product Width



44 cm


Vendor information



Brand Name


APC


Warranty



1 Year(s)