Brodit
Brodit 512653 Active holder 512653
- UPC:
- 0000000000000
- MPN:
- 512653
- Condition:
- New
- Availability:
- Available to Order: 3 - 4 weeks leadtime
Description
Active holder with cig-plug
With tilt swivel.
Use an active holder for your Tab S while driving and you will always have a freshly charged battery! The holder provides a neat and comfortable installation - safe and convenient. The holder is equipped with a cig-plug for connection to the vehicle's 12 Volt socket.
The holder is mounted onto a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the holder into desired position. It is easy to put the Tab S into place in the holder, and to take it with you when leaving the car.
Tablets (Surfpads) should not be installed onto a car�s dashboard if they block the view or block key controls. ProClip (Brodit�s vehicle mounting bracket) is designed for installation of smaller devices like mobile phones and GPS devices, ProClip is not designed for large devices like tablets. In some vehicles the ProClip has an extra firm fit and can then be used also for installation of a tablet. If you want to place a tablet onto the car�s dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.
An installation of a tablet onto a vehicle�s dashboard is always done on the customer�s own responsibility. Brodit recommends to use tablets on the car�s headrest, installed onto a Brodit headrest mount.
INSTALLATION INSTRUCTIONS:Please read all of the instructions and look at the pictures before attaching the holder.
1. Loosen the screw in the center of the holder so you can remove the tilt swivel attaching plate on the back.
2. Place the attaching plate onto the desired position. Screw the attaching plate into place with the enclosed screws.
3. Place the holder over the attaching plate so the screw fits in the hole in the tilt swivel. Tighten the screw until the holder is firmly in place, but still can be adjusted.Slide the device sideways into the holder until you hear / feel it snaps into place.
4. The holder is in place.
Design
Compatibility
Samsung Galaxy Tab S 10.5 SM-T800 Samsung Galaxy Tab S 10.5 SM-T805
Mobile device type
Tablet/UMPC
Product colour
Grey
Proper use
Car
Type
Active holder
Multimedia
Built-in speaker(s)
No
Package dimensions
Gross Weight (Package, kg)
0.25 kg
Power
Built-in charger
Yes
Power source type
Cigar lighter
Product dimensions
Net Weight (Product, kg)
0.2 kg
Technical details
Adjustable
Yes
Vendor information
Brand Name
Brodit
Homepage
http://www.brodit.se/product.html?locale=se&id=512653
Warranty
1 Year(s)
View AllClose
With tilt swivel.
Use an active holder for your Tab S while driving and you will always have a freshly charged battery! The holder provides a neat and comfortable installation - safe and convenient. The holder is equipped with a cig-plug for connection to the vehicle's 12 Volt socket.
The holder is mounted onto a tilt swivel. This mean that you can adjust the angle in order to avoid light reflection on the screen. You can easily switch between portrait and landscape mode by turning the holder into desired position. It is easy to put the Tab S into place in the holder, and to take it with you when leaving the car.
Tablets (Surfpads) should not be installed onto a car�s dashboard if they block the view or block key controls. ProClip (Brodit�s vehicle mounting bracket) is designed for installation of smaller devices like mobile phones and GPS devices, ProClip is not designed for large devices like tablets. In some vehicles the ProClip has an extra firm fit and can then be used also for installation of a tablet. If you want to place a tablet onto the car�s dashboard, each combination of tablet-car must be examined in detail by you in order to determine if such an installation is possible in the specific case. Consideration should be given to the position and how firmly the ProClip is in place, as well as the size of the tablet you wish to use. Brodit will not give any recommendations for such installations.
An installation of a tablet onto a vehicle�s dashboard is always done on the customer�s own responsibility. Brodit recommends to use tablets on the car�s headrest, installed onto a Brodit headrest mount.
INSTALLATION INSTRUCTIONS:Please read all of the instructions and look at the pictures before attaching the holder.
1. Loosen the screw in the center of the holder so you can remove the tilt swivel attaching plate on the back.
2. Place the attaching plate onto the desired position. Screw the attaching plate into place with the enclosed screws.
3. Place the holder over the attaching plate so the screw fits in the hole in the tilt swivel. Tighten the screw until the holder is firmly in place, but still can be adjusted.Slide the device sideways into the holder until you hear / feel it snaps into place.
4. The holder is in place.
Design
Compatibility
Samsung Galaxy Tab S 10.5 SM-T800 Samsung Galaxy Tab S 10.5 SM-T805
Mobile device type
Tablet/UMPC
Product colour
Grey
Proper use
Car
Type
Active holder
Multimedia
Built-in speaker(s)
No
Package dimensions
Gross Weight (Package, kg)
0.25 kg
Power
Built-in charger
Yes
Power source type
Cigar lighter
Product dimensions
Net Weight (Product, kg)
0.2 kg
Technical details
Adjustable
Yes
Vendor information
Brand Name
Brodit
Homepage
http://www.brodit.se/product.html?locale=se&id=512653
Warranty
1 Year(s)
Additional Information
Shipping: |
Available to Order - Call for ETA |
Delivery: |
Available to Order - Call for ETA |
Related Products
Brodit 536577 Active Holder - Brodit 536577
Brodit
£147.11
Holder with lock.
Active holder for fixed installation. With tilt swivel. 2 keys included. This holder is to be used when you will secure your iPad and still have it easy accessable. Perfect for use...
Brodit 521663 Active Holder - Brodit 521663
Brodit
£113.29
With tilt swivel. With USB cable. Apple approved charging cable. Fits devices with skin.
Use an active holder for your Apple device on the road and you will always have a freshly charged battery! In...
Brodit 527942 Active holder for 527942
Brodit
£97.04
This holder is crash tested and approved for use with device without skin/case on Brodit's headrest mount.
Measure your device/skin/case and compare with specifications. Fits for devices...
Brodit 512637 Active holder 512637
Brodit
£59.04
With tilt swivel.
Use an active holder for your Tab 4 while driving and you will always have a freshly charged battery! The holder provides a neat and comfortable installation - safe and convenient...
Brodit 712038 Active holder 712038
Brodit
£49.54
Keep your phone's battery fully charged in an active holder, always within easy sight and reach! Neat, discreet and convenient. Custom made with a perfect, firm fit. With cig-plug cable, 2A charging...
Brodit 513567 Active holder 513567
Brodit
£76.71
Active holder for fixed installation
With tilt swivel, with Molex adapter system. 2A charger. Fits devices with standard and extended battery.
An active holder which is to be connected inside the...
Brodit 512567 Active holder 512567
Brodit
£71.39
Active holder with cig-plug
With tilt swivel. Fits devices with standard and extended battery.
The active holder charges your battery when it is in the holder. The charging device connects to the...
Brodit 513636 Active holder 513636
Brodit
£76.71
With tilt swivel, with Molex adapter system.
Use an active holder for your Tab 4 while driving and you will always have a freshly charged battery! The active holder is to be connected inside the...