Cisco
Cisco AIR-ANT2568VG-N= 2.4 Ghz 6Dbi/5 Ghz 8Dbi Dual AIR-ANT2568VG-N=
- UPC:
- 0882658761713
- MPN:
- AIR-ANT2568VG-N=
- Condition:
- New
- Availability:
- Available to Order: 3 - 4 weeks leadtime
Description
Cisco Aironet Dual-Band Omnidirectional Antenna (AIR-ANT2568VG-N) is designed for outdoor use with Cisco Aironet Outdoor Access Points (hereafter referred to as access points) with radios operating in the 2.4-GHz and 5-GHz frequency bands.
Installation Notes
The antenna is designed to connect to a dedicated antenna port on the access point. No special tools are required to install the antenna.
The antenna is resistant to the full range of outdoor environments. After the antenna is attached to the access point, seal the connections to prevent moisture and other weathering elements from affecting performance. Cisco recommends using a coax seal (such as CoaxSeal) for outdoor connections. Silicone sealant or electrical tape are not recommended for sealing outdoor connections.
Choosing a Mounting Location
The antenna is designed to create an omnidirectional broadcast pattern. To achieve this pattern, the access point should be mounted clear of any obstructions to the sides of the radiating element. If the mounting location is on the side of a building or tower, the antenna pattern is degraded on the building or tower side.
Generally, the higher an antenna is above the ground, the better it performs. A practice is to install your antenna about 5 to 10 ft (1.5 to 3 m) above the roof line and away from all power lines and obstructions.
Tools and Equipment Required
No tools are required to mount the antenna to the access point. However, you may need a �-in. (19-mm) open end or combination wrench (or adjustable wrench) to remove the antenna port covers.
For information about tools required to mount the access point, see the appropriate access point documentation.
Mounting the Antenna
To connect the antenna to the access point, follow these steps:
Step 1 If necessary, remove the antenna port cover.
Step 2 Align the antenna�s N connector with the appropriate antenna port.
Step 3 Gently push the antenna into the port.
Step 4 Tighten the antenna hand tight.
Features
Antenna connector type
N-type
Antenna type
Omni-directional antenna
International Protection (IP) code
IP67
Polarization
Vertical polarization
Operational conditions
Operating temperature (T-T)
-30 - 70 �C
Storage temperature (T-T)
-40 - 85 �C
Package dimensions
Gross Weight (Package, kg)
0.41 kg
Performance
Antenna gain (2.4 GHz)
6 dBi
Antenna gain (5 GHz)
8 dBi
Antenna gain level (max)
8 dBi
Frequency band
2400 - 2483, 5150 - 5925 GHz
Impedance
50 ?
Product dimensions
Net Weight (Product, kg)
0.30999999999999994 kg
Product Height
37.7 cm
Technical details
Harmonized System (HS) code
85177100
Vendor information
Brand Name
Cisco
Warranty
3 Month(s)
Weight & dimensions
Diameter
3.81 cm
View AllClose
Installation Notes
The antenna is designed to connect to a dedicated antenna port on the access point. No special tools are required to install the antenna.
The antenna is resistant to the full range of outdoor environments. After the antenna is attached to the access point, seal the connections to prevent moisture and other weathering elements from affecting performance. Cisco recommends using a coax seal (such as CoaxSeal) for outdoor connections. Silicone sealant or electrical tape are not recommended for sealing outdoor connections.
Choosing a Mounting Location
The antenna is designed to create an omnidirectional broadcast pattern. To achieve this pattern, the access point should be mounted clear of any obstructions to the sides of the radiating element. If the mounting location is on the side of a building or tower, the antenna pattern is degraded on the building or tower side.
Generally, the higher an antenna is above the ground, the better it performs. A practice is to install your antenna about 5 to 10 ft (1.5 to 3 m) above the roof line and away from all power lines and obstructions.
Tools and Equipment Required
No tools are required to mount the antenna to the access point. However, you may need a �-in. (19-mm) open end or combination wrench (or adjustable wrench) to remove the antenna port covers.
For information about tools required to mount the access point, see the appropriate access point documentation.
Mounting the Antenna
To connect the antenna to the access point, follow these steps:
Step 1 If necessary, remove the antenna port cover.
Step 2 Align the antenna�s N connector with the appropriate antenna port.
Step 3 Gently push the antenna into the port.
Step 4 Tighten the antenna hand tight.
Features
Antenna connector type
N-type
Antenna type
Omni-directional antenna
International Protection (IP) code
IP67
Polarization
Vertical polarization
Operational conditions
Operating temperature (T-T)
-30 - 70 �C
Storage temperature (T-T)
-40 - 85 �C
Package dimensions
Gross Weight (Package, kg)
0.41 kg
Performance
Antenna gain (2.4 GHz)
6 dBi
Antenna gain (5 GHz)
8 dBi
Antenna gain level (max)
8 dBi
Frequency band
2400 - 2483, 5150 - 5925 GHz
Impedance
50 ?
Product dimensions
Net Weight (Product, kg)
0.30999999999999994 kg
Product Height
37.7 cm
Technical details
Harmonized System (HS) code
85177100
Vendor information
Brand Name
Cisco
Warranty
3 Month(s)
Weight & dimensions
Diameter
3.81 cm
Additional Information
Shipping: |
Available to Order - Call for ETA |
Delivery: |
Available to Order - Call for ETA |