Kingston 8Gb Ddr3 1600Mhz Pc3-12800 Cl11 Dimm Memory KVR16N11/8

8GB 2Rx8 1G x 64-Bit PC3-12800 CL11 240-Pin DIMM
ValueRAM's 1G x 64-bit (8GB) DDR3-1600 CL11 SDRAM (Synchronous DRAM) 2Rx8, memory module, based on sixteen 512M x 8-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR3-1600 timing of 11-11-11 at 1.5V. This 240-pin DIMM uses gold
contact fingers. 
 
 
Features
• JEDEC standard 1.5V (1.425V
1.575V) Power Supply
• VDDQ = 1.5V (1.425V
1.575V)
• 800MHz fCK for 1600Mb/sec/pin
• 8 independent internal bank
• Programmable CAS Latency: 11, 10, 9, 8, 7, 6
• Programmable Additive Latency: 0, CL - 2, or CL - 1 clock
• 8-bit pre-fetch
• Burst Length: 8 (Interleave without any limit, sequential with
starting address “000” only), 4 with tCCD = 4 which does not
allow seamless read or write [either on the fly using A12 or
MRS]
• Bi-directional Differential Data Strobe
• Internal(self) calibration : Internal self calibration through ZQ
pin (RZQ : 240 ohm ± 1%)
• On Die Termination using ODT pin
• Average Refresh Period 7.8us at lower than TCASE 85°C,
3.9us at 85°C < TCASE < 95°C
• Asynchronous Reset
• PCB : Height 1.180” (30.00mm), double sided component

DescriptionSpecification

Series: Kingston ValueRAM
DDR Type: DDR3
Size: 8GB
Speed: 1600 MHz
Compliance: PC3-12800
Pins: 240-pin
CAS Latency: CL11
Data Integrity Check: Non-ECC
Voltage: 1.5V
Heatsink: No
Additional Information: Unbuffered
Package Type: Blister Pack
Package Weight: 0.0280 kg
Warranty: Lifetime