Kingston 8Gb Ddr4 2666Mhz Pc4-21300 Cl19 Dimm Memory KVR26N19S8/8

ValueRAM's KVR26N19S8/8 is a 1G x 64-bit (8GB) DDR4-2666 CL19 SDRAM (Synchronous DRAM), 1Rx8, memory module, based on eight 1G x 8-bit FBGA
components. The SPD is programmed to JEDEC standard latency DDR4-2666 timing of 19-19-19 at 1.2V. Each 288-pin DIMM uses gold contact fingers.
 
 
Features

Power Supply: VDD=1.2V Typical
VDDQ = 1.2V Typical
VPP - 2.5V Typical
VDDSPD=2.2V to 3.6V
Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals
Low-power auto self refresh (LPASR)
Data bus inversion (DBI) for data bus
On-die VREFDQ generation and calibration
Single-rank
On-board I2 serial presence-detect (SPD) EEPROM
16 internal banks; 4 groups of 4 banks each
Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the mode register set (MRS)
Selectable BC4 or BL8 on-the-fly (OTF)
Fly-by topology
Terminated control command and address bus
PCB: Height 1.23” (31.25mm)
RoHS Compliant and Halogen-Free

DescriptionSpecification

Series: Kingston ValueRAM
DDR Type: DDR4
Size: 8GB
Speed: 2666 MHz
Compliance: PC4-21300
Pins: 288-pin
CAS Latency: CL19
Data Integrity Check: Non-ECC
Low Voltage: No
Voltage: 1.2V Typical
Timings: 19-19-19
Heatsink: No
#Hide#LED Lighting: No
Additional Information: See Overview
Package Type: Blister Pack
Package Weight: 0.0225 kg
Warranty: Lifetime