Planet
Planet GSW-2824P 24-Port 10/100/1000T 802.3at GSW-2824P
- UPC:
- 4711605286428
- MPN:
- GSW-2824P
- Condition:
- New
- Availability:
- Available to Order: 3 - 4 weeks leadtime
Description
Centralized Power Management for Gigabit Ethernet PoE Networking
To facilitate 32W PoE power network applications with Gigabit speed transmission, PLANET GSW-2824P is equipped with 24 10/100/1000BASE-T Gigabit Ethernet ports, 2 extra Gigabit TP ports and 2 1000BASE-X SFP combo interfaces with the inner power system. With a total of 250 watts of PoE budget, it features high-performance Gigabit IEEE 802.3af PoE (up to 15.4W) and IEEE 802.3at PoE+ (up to 32W) capabilities on all ports.
By offering reliable switching technology and advanced networking features, the GSW-2824P optimizes the installation and power management of network devices such as wireless access points, VoIP phones, and security cameras. It also eliminates time and cost of deployment by integrating power and data switching into one unit and freeing network devices from restrictions of power outlet locations and the additional AC wiring.
Perfect Integrated Solution for PoE IP Surveillance
The GSW-2824P brings you an ideally secure surveillance system at a lower total cost. The GSW-2824P provides 24 10/100/1000Mbps 802.3at PoE+ ports able to provide sufficient PoE power to 24 IEEE 802.3af/IEEE 802.3at PoE+ IP cameras at the same time. It is also able to connect with one 25-channel NVR or three 8-channel NVRs, uplinked to backbone switch and the monitoring center. With such a high-performance switch architecture, the recorded video files from the PoE IP cameras can be saved to the NVR system where the administrator can control and monitor the surveillance images in both the local LAN and remote sites.
Ethernet Data Transmission Distance Extension
The DIP switch provides �Standard�, �VLAN� and �Extend� operation modes.
The GSW-2824P operates as a normal IEEE 802.3at PoE+ switch in the �Standard� operation mode.
The �VLAN� operation mode features port-based VLAN function that helps to prevent the IP camera�s multicast or broadcast storm from influencing each other.
In the �Extend� operation mode, the GSW-2824P operates on a per-port basis at 10Mbps duplex operation but supports 20-watt PoE power output over a distance of up to 250 meters overcoming the 100m limit on Ethernet UTP cable.
With this brand-new feature, the GSW-2824P provides an additional solution for 802.3at PoE+ distance extension, thus saving the cost of Ethernet cable installation.
Powered Device Alive Check
The GSW-2824P adopts not only Power over Ethernet technology, but also automated PD monitoring and real-time PoE status.
The PD alive check feature is applied in Standard, VLAN and Extend modes. After the PoE of the port is powered on, the device starts to detect whether the port is transmitting data. If the port does not transmit data and the duration exceeds a specific time, PoE will automatically power off and then re-power. It also will greatly enhance the network reliability in that the PoE port will reset the PD power, thus reducing administrator�s management burden.
Flexible Extension Solution
The two SFP ports built in the GSW-2824P are compatible with the 1000BASE-SX/LX SFP (Small Form-factor Pluggable) fiber transceiver, uplinked to backbone switch and monitoring center in long distance. The distance can be extended from 550 meters (multi-mode fiber) to 10/20/30/40/50/60/70/120 kilometers (single-mode fiber or WDM fiber). They are well suited for applications within the enterprise data centers and distributions.
Data transmission
Jumbo frames
9216
Jumbo frames support
Yes
MAC address table
8000 entries
Store-and-forward
Yes
Switching capacity
56 Gbit/s
Throughput
41.66 Mpps
Design
Certification
FCC Part 15 Class A, CE
Form factor
1U
Housing material
Metal
LED indicators
Y, Yes
Number of fans
2 fan(s)
Product colour
Blue
Rack mounting
Yes
Stackable
Yes
Management features
Switch type
Unmanaged
Network
10G support
No
Auto MDI/MDI-X
Yes
Auto-negotiation
Yes
Full duplex
Yes
Half duplex
Yes
Networking standards
IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z
VLAN support
Yes
Operational conditions
Heat dissipation
948 BTU/h
Operating relative humidity (H-H)
5 - 95 %
Operating temperature (T-T)
0 - 50 �C
Storage relative humidity (H-H)
5 - 95 %
Storage temperature (T-T)
-10 - 70 �C
Package dimensions
Gross Weight (Package, kg)
3.5 kg
Ports & interfaces
Basic switching RJ-45 Ethernet ports quantity
28
Basic switching RJ-45 Ethernet ports type
Gigabit Ethernet (10/100/1000)
Installed SFP modules quantity
2
Power
AC input frequency
50 - 60 Hz
AC input voltage
100 - 240 V
Power consumption (max)
278 Watt
Power source
AC
Power over Ethernet (PoE)
Power over Ethernet (PoE)
Yes
Power over Ethernet plus (PoE+) ports quantity
24
Total Power over Ethernet (PoE) budget
250 Watt
Product dimensions
Net Weight (Product, kg)
3 kg
Product Depth
44.15 cm
Product Height
4.4 cm
Product Width
20.73 cm
Vendor information
Brand Name
Planet
Warranty
3 Year(s)
View AllClose
To facilitate 32W PoE power network applications with Gigabit speed transmission, PLANET GSW-2824P is equipped with 24 10/100/1000BASE-T Gigabit Ethernet ports, 2 extra Gigabit TP ports and 2 1000BASE-X SFP combo interfaces with the inner power system. With a total of 250 watts of PoE budget, it features high-performance Gigabit IEEE 802.3af PoE (up to 15.4W) and IEEE 802.3at PoE+ (up to 32W) capabilities on all ports.
By offering reliable switching technology and advanced networking features, the GSW-2824P optimizes the installation and power management of network devices such as wireless access points, VoIP phones, and security cameras. It also eliminates time and cost of deployment by integrating power and data switching into one unit and freeing network devices from restrictions of power outlet locations and the additional AC wiring.
Perfect Integrated Solution for PoE IP Surveillance
The GSW-2824P brings you an ideally secure surveillance system at a lower total cost. The GSW-2824P provides 24 10/100/1000Mbps 802.3at PoE+ ports able to provide sufficient PoE power to 24 IEEE 802.3af/IEEE 802.3at PoE+ IP cameras at the same time. It is also able to connect with one 25-channel NVR or three 8-channel NVRs, uplinked to backbone switch and the monitoring center. With such a high-performance switch architecture, the recorded video files from the PoE IP cameras can be saved to the NVR system where the administrator can control and monitor the surveillance images in both the local LAN and remote sites.
Ethernet Data Transmission Distance Extension
The DIP switch provides �Standard�, �VLAN� and �Extend� operation modes.
The GSW-2824P operates as a normal IEEE 802.3at PoE+ switch in the �Standard� operation mode.
The �VLAN� operation mode features port-based VLAN function that helps to prevent the IP camera�s multicast or broadcast storm from influencing each other.
In the �Extend� operation mode, the GSW-2824P operates on a per-port basis at 10Mbps duplex operation but supports 20-watt PoE power output over a distance of up to 250 meters overcoming the 100m limit on Ethernet UTP cable.
With this brand-new feature, the GSW-2824P provides an additional solution for 802.3at PoE+ distance extension, thus saving the cost of Ethernet cable installation.
Powered Device Alive Check
The GSW-2824P adopts not only Power over Ethernet technology, but also automated PD monitoring and real-time PoE status.
The PD alive check feature is applied in Standard, VLAN and Extend modes. After the PoE of the port is powered on, the device starts to detect whether the port is transmitting data. If the port does not transmit data and the duration exceeds a specific time, PoE will automatically power off and then re-power. It also will greatly enhance the network reliability in that the PoE port will reset the PD power, thus reducing administrator�s management burden.
Flexible Extension Solution
The two SFP ports built in the GSW-2824P are compatible with the 1000BASE-SX/LX SFP (Small Form-factor Pluggable) fiber transceiver, uplinked to backbone switch and monitoring center in long distance. The distance can be extended from 550 meters (multi-mode fiber) to 10/20/30/40/50/60/70/120 kilometers (single-mode fiber or WDM fiber). They are well suited for applications within the enterprise data centers and distributions.
Data transmission
Jumbo frames
9216
Jumbo frames support
Yes
MAC address table
8000 entries
Store-and-forward
Yes
Switching capacity
56 Gbit/s
Throughput
41.66 Mpps
Design
Certification
FCC Part 15 Class A, CE
Form factor
1U
Housing material
Metal
LED indicators
Y, Yes
Number of fans
2 fan(s)
Product colour
Blue
Rack mounting
Yes
Stackable
Yes
Management features
Switch type
Unmanaged
Network
10G support
No
Auto MDI/MDI-X
Yes
Auto-negotiation
Yes
Full duplex
Yes
Half duplex
Yes
Networking standards
IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z
VLAN support
Yes
Operational conditions
Heat dissipation
948 BTU/h
Operating relative humidity (H-H)
5 - 95 %
Operating temperature (T-T)
0 - 50 �C
Storage relative humidity (H-H)
5 - 95 %
Storage temperature (T-T)
-10 - 70 �C
Package dimensions
Gross Weight (Package, kg)
3.5 kg
Ports & interfaces
Basic switching RJ-45 Ethernet ports quantity
28
Basic switching RJ-45 Ethernet ports type
Gigabit Ethernet (10/100/1000)
Installed SFP modules quantity
2
Power
AC input frequency
50 - 60 Hz
AC input voltage
100 - 240 V
Power consumption (max)
278 Watt
Power source
AC
Power over Ethernet (PoE)
Power over Ethernet (PoE)
Yes
Power over Ethernet plus (PoE+) ports quantity
24
Total Power over Ethernet (PoE) budget
250 Watt
Product dimensions
Net Weight (Product, kg)
3 kg
Product Depth
44.15 cm
Product Height
4.4 cm
Product Width
20.73 cm
Vendor information
Brand Name
Planet
Warranty
3 Year(s)