Seagate Enterprise ST8000NM017B internal hard drive 8 TB 7200 RPM 256 MB 3.5" Se ST8000NM017B

Seagate Enterprise ST8000NM017B internal hard drive 8 TB 7200 RPM 256 MB 3.5" Serial ATA III

Seagate Enterprise ST8000NM017B. HDD capacity: 8 TB, HDD speed: 7200 RPM, Storage drive buffer size: 256 MB, HDD size: 3.5", Interface: Serial ATA III

Features HDD capacity The maximum storage capacity of the hard disk, usually measured in bytes e.g. GB. 8 TB HDD speed The rotational speed of a hard disk expressed in rotations per minute. The faster the better. 7200 RPM Storage drive buffer size 256 MB HDD size The amount of data that the hard drive can store. 3.5" Interface Interface ports to connect pieces of equipment. USB (Universal Serial Bus) has become the most popular wired interface to connect peripherals. USB 2.0 supports speeds up to 480 Mbit/s (USB 1: 12 Mbit/s). The interface FireWire is also known as the IEEE 1394 standard. Enhanced IDE (EIDE)is sometimes referred to as Fast ATA, Fast IDE or ATA-2. Serial ATA III Type Characteristics of the device. HDD Component for What this product is used as a part of (component for). Disk array HDD interface transfer rate 6 Gbit/s Average latency The average duration before a device can start with a job (for example reading a file from a hard disk). 4.16 ms Uncorrectable Bit Error Rate (UBER) < 1 per 10^15 bits read Rotational Vibration (RV) sensors 24/7 operation Mean time between failures (MTBF) Statistical model used to indicate product/mechanism reliability; expressed in hours and percentage of duty cycle. This number (in hours) does not indicate the mean time before failure for a single unit/mechanism. 2000000 h Power Power consumption (typical) Amount of power consumed by this model, often expressed in watts (W). Typical values that manufacturers give are power consumption when off, standby/suspended mode, typical use, maximum usage. 11.03 W