TP-Link 10-Port Gigabit Desktop Switch with 6-Port PoE+ and 2-Port PoE++ TL-SG1210PP

Overview
TL-SG1210PP is an unmanaged switch with 10 Gigabit ports that requires no configuration and provides 8 PoE (Power over Ethernet) ports. It can automatically detect and supply power with all IEEE 802.3af/at/bt compliant Powered Devices (PDs) at port 1-2 and IEEE 802.3af/at compliant Powered Devices (PDs) at port 3-8. In this situation, the electrical power is transmitted along with data in one single cable allowing you to expand your network to where there are no power lines or outlets, where you wish to fix devices such as APs, IP Cameras or IP Phones, etc.

Power Over Ethernet
8 RJ45 ports (port 1 to port 8) of the switch support Power over Ethernet (PoE) function. They can automatically detect and supply power with those IEEE 802.3af/at/bt compliant Powered Devices (PDs) at port 1-2 and IEEE 802.3af/at compliant Powered Devices (PDs) at port 3-8.

Overload Arrangement
TL-SG1210PP has the priority function which will help protect the system when the system power is overloaded. If all PoE PDs power consumption is ? 123 W*, a priority will be arranged among the PoE ports, then the system will cut off the power of the lowest-priority port.

Intelligent Power Management
Priority (port 1 > port 2 ......> port 8): This function will help protect the system when the system power is overloaded. For example, port 3, 4, 5 and 6 is using 25 W respectively (maximum power per port is 30 W); the system power is 100 W in total. If there is an additional PD inserted to port 1 with 35 W, and then the system will cut off the power of port 6 because of the overloaded power, this means port 3, 4 and 5 will use 25 W respectively and port 1 will use 35 W, no power will be supplied to port 6.

Highlight Performance
- Up to 250 m PoE power supply and data transmission under Extend Mode** for port 1-4.
- Priority Mode ensures high priority of ports 1-2 to guarantee the quality of the sensitive applications
- Isolation Mode allows one-click client traffic separation for higher security and performance
- With PoE Auto Recovery, the switch will constantly detect the data transmission with PoE-powered devices (PD) for port 1-8. When the switch finds that a PD stops sending data packets to the switch for a long period, the switch will reboot it automatically.

TL-SG1210PP is easy to install and use. It requires no configuration and installation. With desktop and wall mountable design, outstanding performance and quality, the TP-Link 10-Port Gigabit Desktop Switch with 8-Port PoE+ and 2-Port PoE++ TL-SG1210PP is a great selection for expanding your network.

Features


9- 10/100/1000Mbps RJ45 Ports, 1- 1000Mbps Combo SFP/RJ45 Port


With 2- PoE++ ports and 6- PoE+ ports, transfers data and power on one single cable


Works with IEEE 802.3af/at/bt compliant PDs


802.1p/DSCP QoS enable smooth latency-sensitive traffic


Supports PoE Power up to 30 W for each PoE+ port and 60 W for PoE++ port


Supports PoE Power up to 123 W for all PoE ports*


Plug and Play, no configuration and installation required


Up to 250m data and power transmitting range under Extend Mode**


PoE Auto Recovery guarantees stable operation of PoE devices by automatically rebooting the dropped or unresponsive PD devices


Isolation Mode allows one-click client traffic separation for higher security and performance


Priority Mode guarantees the quality of sensitive applications like video monitoring in critical business areas by prioritizing the data of ports 1-2



Data transmission


Forwarding rate
.88 Mpps


MAC address table

4000 entries


Store-and-forward

Yes


Switching capacity
Gbit/s



Power over Ethernet (PoE)


Power over Ethernet plus (PoE+) ports quantity

2


Total Power over Ethernet (PoE) budget
3 W


Power over Ethernet (PoE)

Yes


Power over Ethernet 4PPoE (PoE++) ports quantity

6



Ports & interfaces


Combo SFP ports quantity

1


Basic switching RJ-45 Ethernet ports type

Gigabit Ethernet (10/100/1000)


Basic switching RJ-45 Ethernet ports quantity



Gigabit Ethernet (copper) ports quantity




Security


IGMP snooping

Yes



Management features


Quality of Service (QoS) support

Yes


Switch type

Unmanaged



Design


Product colour

Black


Rack mounting

No


Housing material

Steel


Certification

FCC, CE, RoHS


LED indicators

Yes



Weight & dimensions


Height

26 mm


Width
9 mm


Depth
6 mm



Logistics data


Harmonized System (HS) code

85176990



Network


Networking standards

IEEE 802.3af, IEEE 802.3at, IEEE 802.3i, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z


Cable types supported

Cat3, Cat4, Cat5, Cat5e


Flow control support

Yes


Copper ethernet cabling technology
BASE-T, 100BASE-TX


Auto-negotiation

Yes

G support

No


Auto MDI/MDI-X

Yes


MAC address auto-learning supported

Yes


MAC address auto-aging supported

Yes



Operational conditions


Operating temperature (T-T)

0 - 40 -C


Heat dissipation

482.17 BTU/h


Operating relative humidity (H-H)
- 90


Storage relative humidity (H-H)

5 - 90


Storage temperature (T-T)

-40 - 70 -C



Performance


Fanless

Yes



Power


Number of power supply units

1


AC input voltage

90 - 220 V


Input voltage

53.5 V


AC input frequency

50 Hz


Power supply included

Yes


Input current

2.43 A


Power source

DC/PoE


Power consumption (max)
4.1 W



Packaging data


Cables included

AC


Package type

Box


User guide

Yes